Airport safety monitoring is not limited to airborne traffic; Surface Movement management is essential for preventing runway incursions. ADS-B Type 0 (Surface Position) messages allow for the tracking of tugs, emergency vehicles, and follow-me cars with high precision.
π‘ Hardware Specs & RF Parameters
- Frequency: 1090 MHz (Mode S)
- Antenna Gain: 5.5 - 9 dBi (Collinear)
- Noise Figure (NF): < 1.0 dB
- SDR: RTL-SDR V4, Airspy R2 or FlightAware Stick
RF Architecture: Filtering and Amplification
Receiving ground signals is inherently more complex than airborne signals due to attenuation from physical obstacles like hangars and terminals. Using a Cavity Filter instead of common SAW filters is indispensable, as the former offers superior selectivity and lower insertion loss, protecting the receiver from interference from nearby LTE/5G towers. Integrating an LNA (Low Noise Amplifier) powered via Bias-Tee directly at the antenna base is crucial to compensate for coaxial cable losses.
CPR Decoding and Type 0 Messages
Unlike Airborne messages, Surface messages utilize a local CPR (Compact Position Reporting) encoding format. The receiver must know the airport's reference coordinates to correctly decode the position, as the ambiguity range is much tighter. Type 0 messages also transmit ground speed and heading, allowing for smooth visualization of pushback maneuvers.
| Parameter / Component | Optimal Value / Description |
|---|---|
| Coaxial Cable | LMR-400 or better (low loss at 1GHz) |
| Bandpass Filter | 1090 MHz Cavity Filter (BW 10-20 MHz) |
| Software | dump1090-fa or readsb with --net-ri-port flag |
| SDR Sampling | 2.4 MSPS or higher |
To contribute to the global network and view real-time traffic, we invite all enthusiasts to monitor routes on map.adsbitalia.it and consult our complete feeder guide at adsbitalia.it/en/feeding.html.

